Autrans India Private Limited
Guindy, Chennai, Tamil Nadu
SEND SMS
SEND EMAIL
Product Details:
| Maximum dumping height | 2865 mm |
| Engine Power(HP) | 28HP |
| Model | U30-6 |
| Maximum Engine Power(HP) | 28 |
| Maximum Operating weight (Kg) | 5000 Kg |
| Working Area | Forest Lumbering type, Desert Type, Rock Type, Wet-Land Type, River Side, Coal Bulldozing Type |
| Maximum Bucket Capacity(cum) | 0.11 cum |
| Engine type | water-cooled, Direct injection |
| Shoe Width(mm) | 400 mm |
| Main Pumps | Kubota |
| Battery (Volts) | 12V |
| Fuel Tank (Ltr) | 40 |
| Warranty | Warranty |
| Swing Speed | 8.8 rpm |
| After Sales Service Available | Yes |
| Gradeability | 30 degree |
| Engine Model | Kubota D1703-M-E3-BH-11 |
| Operating Weight | 3030/3120 Kg |
| Bucket Capacity | 0.11 meter cube |
| Travel motor type | Hydraulic piston motor 2F |
| Minimum tail turning radius | 790 mm |
| Fuel Tank Capacity | 46 litre |
| Overall length | 4530 mm |
| Overall height | 2,455 mm |
| Maximum digging height | 4250 mm |
| Overall width | 1,550 mm |
| Swing motor type | Hydraulic piston motor |
| Minimum ground clearance | 290 mm |
| Engine Total displacement | 1.647(1,647) L(mL) |
| Maximum digging force | 30.0 (3059) kN (kgf) |
| Maximum vertical wall digging depth | 2290 mm |
| Maximum digging radius | 4905 mm |
| Boom swing | 70 / 48 degree left/right |
| Minimum slewing radius of front part | 2290 (1845) mm (swing) |
| Standard Bucket width | 570/520 mm (with/without cutting blade) |
| Track type | Rubber / Steel |
| Track Width | 300 mm |
| Overall length of track | 2,100 mm |
| Tumbler distance | 1,665 mm |
| Travel speed | 3.1/4.6 km/h (1 st/2nd gear) |
| Engine Rated output | 20.5 KW (27.5 Hp) / 2200 rpm |
| Blade Width | 1550 mm |
| Blade Height | 343 mm |
| Maximum lift above | 365/375 mm (GL up/down) |
| Hydraulic pump type | Variable pump x 2 + gear pump x 1 |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Excavator Model | Kubota |
| Working Area | Coal Bulldozing Type, Wet-Land Type, River Side, Forest Lumbering type, Rock Type, Desert Type |
| Engine type | Direct injection, water-cooled, intercooler, 4-cycle, 4 cylinder diesel engine with turbocharger |
| Operating Weight (Tons) | 5 Tons |
| Maximum Operating weight | 5000 Kg |
| Working Conditions | Rock Type, Forest Lumbering type, Desert Type |
| Batteries (Volts) | 12 V |
Excavator
Established in 1890, Kubota - taking full advantage of its forward-looking management policies and by incorporating unique R&D activities - has made constant efforts to remain on the leading-edge of development and innovation.
Kubota launched its 1st mini excavator model in 1974, since then it has had 40 years' experience in construction machinery business.
Zero-tail Swing. Boom Swing
It can realize "Digging along the wall " in combination with "swing structure"
Good for job in narrow area (example, beside the road, in-house area, in plantation)
High visibility
During the historic development of mini excavator market of over 30 years, the two basic conceptions, boom swing and zero-tail-swing, revealed the importance for the first time in 1980s to comply with the global need of diversified construction sites. During the late 1990s, Kubota took the lead by launching its international standard mini excavator integrating both features for global market.
Boom Swing
The boom swing realizes direct digging operation close to the house edge without putting the machine in motion. Combined with zero-tail-swing structure, the machine is very suitable for operations in tight places.
The Kubota mini excavator adopts zero-tail-swing structure. When the machine is swiveling, the tail always remains within the track width. It realizes the worry-free operation in tight places.
Auto Idling System
Save up to 10 percent of fuel with Kubota's Auto idle. When the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions while reducing operating costs. Even in an urban area and during nighttime, you may carry out operations at ease.
Smooth, Quick and Powerful Operation
Relying on its highly productive, ultra-maneuverable, cost-efficient, and environment-friendliness, the new hydraulic system is ready to perform efficient and powerful operation.
. USPs include;
Zero Tail Swing to work in Narrow Work Spaces
Digital Display Panel
Boom-Swing operations
Fuel efficient Kubota Engine
Four simultaneous (Boom, Arm, Bucket & Swing) Hydraulics operations
Boom Lowering Prevention
ROPS/FOPS Cabin for Operator Safety
Product Details:
| Minimum Order Quantity | 1 Number |
| Condition of Excavator | New |
| Maximum Engine Power | 100 HP |
| Maximum Operating weight | 5000 Kg |
| Maximum Bucket Capacity | 2.0 cum |
| Engine type | Direct injection, water-cooled |
| Shoe Width | 500 mm |
| Excavator Model | Kubota |
| Brand | Kubota |
Hydraulic Excavators
Established in 1890, Kubota - taking full advantage of its forward-looking management policies and by incorporating unique R&D activities - has made constant efforts to remain on the leading-edge of development and innovation.
Zero-tail Swing. Boom Swing
It can realize "Digging along the wall " in combination with "swing structure"
Good for a job in a narrow area (example, beside the road, in house area, in plantation)
High visibility
During the historic development of mini excavator market of over 30 years, the two basic conceptions, boom swing, and zero-tail swing revealed the importance for the first time in the 1980s to comply with the global need of diversified construction sites. During the late 1990s, Kubota took the lead by launching its international standard mini excavator integrating both features for the global market.
Boom Swing
The boom swing realizes direct digging operation close to the house edge without putting the machine in motion. Combined with zero-tail swing structure, the machine is very suitable for operations in tight places.
The Kubota mini excavator adopts zero-tail swing structure. When the machine is swiveling, the tail always remains within the track width. It realizes the worry-free operation in tight places.
Auto Idling System
Save up to 10 percent of fuel with Kubota's Auto idle. When the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions while reducing operating costs. Even in an urban area and during nighttime, you may carry out operations at ease.
Smooth, Quick and Powerful Operation
Relying on its highly productive, ultra-maneuverable, cost-efficient, and environment-friendliness, the new hydraulic system is ready to perform the efficient and powerful operation.
. USPs include;
Zero Tail Swing to work in Narrow Work Spaces
Digital Display Panel
Boom-Swing operations
Fuel efficient Kubota Engine
Four simultaneous (Boom, Arm, Bucket & Swing) Hydraulics operations
Boom Lowering Prevention
ROPS/FOPS Cabin for Operator Safety
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Engine Power(HP) | 17 HP |
| Model | Kubota D782-E2-BH7 |
| Engine type | 4-cycle, water-cooled, Direct injection |
| Bucket Capacity (cubic meters) | 0.04 cum |
| Shoe Width | 200 mm |
| Fuel Tank Capacity | 18 L |
| Bucket Capacity | 0.04 meter cube |
| Swing speed | 8.7 rpm |
| Blade Width | 990/1240 mm |
| Max digging height | 3540 mm |
| Blade Height | 265 mm |
| Max lift above ground and drop below ground | 260 / 180 mm |
| Hydraulic Pump Type | Variable pump x 2 + gear pump x 1 |
| Operating Weight | 1640 Kg |
| Swivel motor type | Orbit motor |
| Travel motor type | Hydraulic piston motor 2F |
| Overall length | 1715 mm |
| Max digging force | 15.2 (1545) kN (kgf) |
| Overall height | 3575 mm |
| Overall width | 990 / 1240 mm |
| Min ground clearance | 145 mm |
| Max dumping height | 2440 mm |
| Total displacement | 778 cc |
| Rated output | 9.9(13.3) / 2300 kW (HP) / rpm |
| Max digging depth | 2310 mm |
| Max vertical wall digging depth | 1910 mm |
| Max digging radius | 3900 mm |
| Boom swing | 65 / 58 degree left/right |
| Track type | Steel |
| Min slewing radius of front part | 1440 (1210) mm (Swing) |
| Min tail turning radius | 620 mm |
| Std Bucket width | 450 / 400 mm (with/without cutting blade) |
| Track Width | 230 mm |
| Crawler length | 1585 mm |
| Tumbler distance | 1230 mm |
| Travel speed | 2.2 / 4.3 km/h (1 st/2nd gear) |
| Gradeability | 30 degree |
Kubota U15-3 Mini Excavator
Established in 1890, Kubota - taking full advantage of its forward-looking management policies and by incorporating unique R&D activities - has made constant efforts to remain on the leading-edge of development and innovation.
USPs include;
Zero Tail Swing to work in Narrow Work Spaces
Digital Display Panel
Boom-Swing operations
Fuel efficient Kubota Engine
Four simultaneous (Boom, Arm, Bucket & Swing) Hydraulics operations
Boom Lowering Prevention
ROPS/FOPS Cabin for Operator Safety
Conquering the international market, Kubota mini excavator combining the zero-tail and boom swing features.
During the historic development of mini excavator market of over 30 years, the two basic conceptions, boom swing, and zero-tail-swing revealed the importance for the first time in the 1980s to comply with the global need of diversified construction sites. During the late 1990s, Kubota took the lead by launching its international standard mini excavator integrating both features for the global market.
Boom Swing
The boom swing realizes direct digging operation close to the house edge without putting the machine in motion. Combined with zero-tail-swing structure, the machine is very suitable for operations in tight places.
The Kubota mini excavator adopts zero-tail-swing structure. When the machine is swiveling, the tail always remains within the track width. It realizes the worry-free operation in tight places.
Auto Idling System
Save up to 10 percent of fuel with Kubota''s Auto idle. When the control levers are in neutral for more than 4 seconds, the engine RPM automatically idles. Move any control lever and the engine RPM immediately returns. This innovative feature reduces noise and exhaust emissions while reducing operating costs. Even in an urban area and during nighttime, you may carry out operations at ease.
Smooth, Quick and Powerful Operation
Kubota adopts "3 pump system," using three independent pumps for the boom, arm, and swivel, to make the co-operation of the bucket, boom, and swivel, smooth and efficient. It mounts high capacity control valve and hydraulic variable pumps to realize superb shoveling and loading performance.
Product Details:
| Ground Clearance | 11.3 in. (287 mm) |
| Bucket Rotation | 181.2 deg |
| Displacement | 68.5 cu. in. (1123 cc) |
| Alternator | 40 amp |
| Overall Width | 53.7 in. (1365 mm) |
| Weight | 823 lbs. (374 kg) |
| Loading Height | 77.3 in. (1963 mm) |
| Loading Reach | 52.1 in. (1324 mm) |
| Model Name | B26TLB |
| Power Steering Pump | 4.2 gpm (16.0 l/min) |
| Quick Attach Coupler | Skid Steer type |
| Reach From Swing Pivot | 133.9 in. (3400 mm) |
| Reach with Bucket on Ground | 61.5 in. (1561 mm) |
| Self Leveling Type | Mechanical spill guard |
| Standard Bucket Weight | 278 lbs. (126 kg) or 328 lbs. (149 kg) |
| Standard Bucket Width | 60 or 66 in. |
| Steering Type | Hydrostatic power steering |
| Total Hydraulic Flow | 11.2 gpm (42.3 l/min) |
| Transport Height | 89.1 in. (2264 mm) |
| Arm Breakout Force | 3123 lbs. (9444 N) |
| Battery Voltage x Capacity | 12 volt,433 CCA |
| Bore and Stroke | 3.1 x 3.1 in. (78 mm x 78.4 mm) |
| Brake Type | Wet disc |
| Bucket Roll Back Angle | 46 deg |
| Digging Depth | 7.0 in. (177 mm) |
| Final Drive | Spur gear |
| Front Axle Type | Bevel gear type,4WD |
| Implement Pump | 7.0 gpm (26.3 l/min) |
Product Details:
| Condition of Excavator | New |
Product Details:
| Brand | Kubota |
| Warranty | Warranty |
| Condition | New |